company news about The slotting die-cutting machine's maintenance cycle for carton printing

The following elements are primarily included in the carton printing slotting die-cutting machine's maintenance cycle:
1. Change the oil:
Replace the oil every three months and add fresh oil when using for the first time. The oil replacement cycle can be modified based on the working environment and how frequently the equipment is used.
To prevent equipment failure brought on by oil issues, make sure the kind and quality of the oil you replace satisfy the specifications of the equipment.
Every week, conduct a routine daily inspection that takes into account the circuit's wear as well as the mechanical and wearing components. The parts should be changed as soon as possible if they are discovered to be seriously worn out or damaged.
2. Slotting part: To make sure there is no oil or contaminants on the shaft surface, clean the shaft with gasoline after every usage. Since the middle knife serves as the foundation for all of the machine's operations, it should be in the center position.
The electric system Make sure the electrical circuit is not slack, shorted out, or open-circuited by routinely inspecting its connection. Check the control system's dependability and stability concurrently.
Additional maintenance actions:
Examining fasteners: Make sure that the equipment's fasteners—such as screws, nuts, etc.—are securely fastened on a regular basis to avoid loosening and malfunctioning.
Electrical components that are resistant to moisture and dust: Make that the electrical system is operating normally, and give particular attention to electrical components that are resistant to moisture and dust.

The carton printing slotting die-cutting machine's service life can be successfully increased with the help of the aforementioned maintenance procedures, guaranteeing the equipment's steady functioning and effective output.