|
Product Details:
|
| Type: | Flexographic Printer | Usage: | For Carton Print Slotting And Die Cutting |
|---|---|---|---|
| Product Name: | Box Flexo Priting Slotting Machine | Product Type: | Paper Making Machine |
| Processing Type: | Box Making Machines | Machine Type: | Corrugated Board Carton Printing Machine |
| Application: | Carton Box Making Machine | ||
| Highlight: | Corrugated Box Printing Machine With Slotter,Die Cutter Corrugated Box Printing Machine |
||
Model: 2800x4200
| Max.Sheet size | 2800x4200mm |
| Max. speed: | 80pcs/min. |
| Economical speed: | 60pcs/min. |
| Max.working size: | 2800 x 4200mm |
| Min.sheet size: | 500mmX600mm |
| Max.printing area: | 2800 x 4200mm |
| Wall thickness: | HT250, 80mm |
| Printing cylinder out diameter: | 890mm(with cliché: 900mm) |
| Cliché thickness: | 7mm |
| Slot width x Slot depth: | 7mmX300mm |
| Max. paper thickness | 10mm |
| Slotting accuracy | ±1.5mm |
| Printing registration(medium speed): | ±0.5mm |
| Mesh mode: | 180LPI |
| Dimension of the whole machine | 13000(L)x7000(W)x3300(H)mm |
| Total power(KW) | 50KW |
| Total weight(Ton) | 50TONS |
1.Machine clutch
1.Electric controlling the clutch of the machine platform and installed alarms in order to assure the safe of the operator while the bell rings constantly during marching.
2.Drive shaft is equipped the clutch in order to avoid the wrong operation damaging the machine(if the machine is not locked ,the main motor could not revolve)
3.Pneumatic type interlocking device.
4.Main motor startup protection device.
2.Lead edge feeding paper system(domestic)
1.Lead edge feeding paper system can decrease the clogging when feeding paper.
2.Wind absorbing auxiliary feeding paper , so the bending paper can feed in smoothly, the quantity of the wind could adjust according to the paperboard , it can ensure the
3.vacuum adsorptive power , so the feeding paper is much precise.
4.Front and back baffle adopt manual adjustment , the left and right baffle adopts electric adjustment.
5.The feeding paper wheel adopts Polyurethane , strong friction and long using life.
6.The machine is suitable three layer and five layer corrugated paperboard ,including the E corrugated paperboard.
7.Feeding paper counter , set and display the production.
3.Absorb dust device
It is equipped the clear dust device (upper wind absorbing , clear dust brush) , it can clear the dust and impurity on the paperboard and increase the printing quality.
4.Feeding paper roller
1.Seamless steel tube is packed with the wear resisting rubber and has gone through the dynamic revise
2.The under feeding paper is chromed
3.The gap between feeding paper rollers adopt manual adjustment , the adjusting range is 0-11mm
4.The operating control switch
5.The control panel adopts touching screen , it can control feeding paper Unit , printing Unit , die cutting Unit and it is easy to operate.
5. Automatically zero device.
Feeding paper Unit , printing Unit , die cutting Unit adopt electric zero device.
Common carton box use the automatically zero device , after printing two piece , it can adjust to the correct position and decrease the wasting paper.
Contact Person: Mr. Johnson
Tel: +8613928813765
Fax: 86-20-3482-6019
